H3C Technologies H3C S3100 Series Switches - Manual (Page 598)

Operation Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch Chapter 4 Device Management
4-1
Chapter 4 Device Management
4.1 Introduction to Device Management
The device management function of the Ethernet switch can report the current status
and event-debugging information of the boards to you. Through this function, you can
maintain and manage your physical device, and restart the system when some
functions of the system are abnormal.
4.2 Device Management Configuration
4.2.1 Device Management Configuration Tasks
Table 4-1
Device management configuration tasks
Operation Description Related section
Restart the Ethernet
switch
—
Section 4.2.2 “Restarting
the Ethernet Switch”
Schedule a reboot on the
switch
Optional
Section 4.2.3 “Scheduling
a Reboot on the Switch”
Specify the ARP to be
adopted at reboot
Optional
Section 4.2.4 “Specifying
the APP to be Adopted at
Reboot”
Update the BootROM Optional
Section 4.2.5 “Updating
the BootROM”
4.2.2 Restarting the Ethernet Switch
You can perform the following operation in user view when the switch is in trouble or
needs to be restarted.
Table 4-2
Restart the Ethernet switch
Operation Command Description
Restart the Ethernet switch
reboot
[ unit unit-id ] —