H3C Technologies H3C S3100 Series Switches - Manual (Page 198)

Operation Manual – MSTP
H3C S3100-52P Ethernet Switch
Chapter 1 MSTP Configuration
1-23
I. Specify whether the link connected to a port is point-to-point link in system
view
Table 1-17 Specify whether the link connected to a port is point-to-point link in system
view
Operation Command Description
Enter system view system-view —
Specify whether the
link connected to a
port is point-to-point
link
stp interface
interface-list
point-to-point
{
force-true |
force-false |
auto }
Required
The auto keyword is adopted by
default.
The force-true keyword specifies that
the links connected to the specified
ports are point-to-point links.
The force-false keyword specifies
that the links connected to the
specified ports are not point-to-point
links.
The auto keyword specifies to
automatically determine whether or
not the links connected to the
specified ports are point-to-point links.