H3C Technologies H3C S3100 Series Switches - Manual (Page 61)

Operation Manual – Login
H3C S3100-52P Ethernet Switch Chapter 3 Logging in through Telnet
3-10
3.4 Telnet Configuration with Authentication Mode Being
Scheme
3.4.1 Configuration Procedure
Table 3-8
Telnet configuration with the authentication mode being scheme
Operation Command Description
Enter system view
system-view
—
Enter the
default ISP
domain
view
domain
domain-name
Configure
the AAA
scheme to
be applied
to the
domain
scheme
{ local | none |
radius-scheme
radius-scheme-name
[
local
] |
hwtacacs-scheme
hwtacacs-scheme-nam
e
[ local ] }
Configure
the
authentic
ation
scheme
Quit to
system
view
quit
Optional
By default, the local AAA
scheme is applied. If you
specify to apply the local AAA
scheme, you need to perform
the configuration concerning
local user as well.
If you specify to apply an
existing scheme by providing
the
radius
-scheme-name
argument, you need to
perform the following
configuration as well:
z
Perform AAA&RADIUS
configuration on the
switch. (Refer to the
AAA&RADIUS&HWTACA
CS&EAD module for
more.)
z
Configure the user name
and password accordingly
on the AAA server. (Refer
to the user manual of AAA
server.)
Create a local user and
enter local user view
local-user
user-name
No local user exists by
default.
Set the authentication
password for the local
user
password
{ simple |
cipher
} password
Required
Specify the service type
for VTY users
service-type telnet
[ level level ]
Required
Quit to system view
quit
—
Enter one or more VTY
user interface views
user-interface vty
first
-number
[ last-number ]
—