H3C Technologies H3C S3100 Series Switches User Manual
Page 490
Operation Manual – SSH Terminal Service
H3C S3100-52P Ethernet Switch
Chapter 1 SSH Terminal Service
1-4
Table 1-1
SSH2.0 Server configuration tasks
Operation
Command
Related section
Configure user interface(s) to
support specified protocol(s)
protocol inbound
Generate local RSA key pair rsa local-key-pair create
Destroy local RSA key pair
Specify a default
authentication type for SSH
users
ssh authentication-type
default
Configure authentication type
for an SSH user
ssh user username
authentication-type
Set SSH authentication
timeout time
ssh server timeout
Set SSH authentication retry
times
ssh server
authentication-retries
Configure a client public key
for an SSH user
ssh user username
assign rsa-key
keyname
Section “Configuring a
user"
I. Configuring user interface(s) to support specified protocol(s)
Table 1-2
Configure user interface(s) to support specified protocol(s)
Operation
Command
Description
Enter system view
system-view
—
Enter the view of one or
multiple user interfaces
user-interface
[ type-keyword ] number
[ ending-number ]
Required
Configure the user
interface(s) to support
specified protocol(s)
protocol inbound
{ all
|ssh | telnet }
Optional
By default, both Telnet
and SSH are supported.