H3C Technologies H3C S3100 Series Switches - Manual (Page 432)

Operation Manual – Cluster
H3C S3100-52P Ethernet Switch Chapter 1 Cluster
1-9
Operation Command Description
Enter Ethernet port view
interface interface-type
interface-number
—
Enable NTDP on the
Ethernet port
ntdp enable
Required
1.2.5 Configuring NTDP-Related Parameters
Table 1-6
Configure NTDP-related parameters
Operation Command Description
Enter system view
system-view
—
Configure the range to
collect topology
information
ntdp hop hop-value
Optional
By default, the system collects
topology information from the
devices within three hops.
Configure the device
forward delay of
topology collection
requests
ntdp timer hop-delay
time
Optional
By default, the device forward
delay is 200 ms.
Configure the port
forward delay of
topology collection
requests
ntdp timer port-delay
time
Optional
By default, the port forward
delay is 20 ms.
Configure the interval to
collect topology
information periodically
ntdp timer
interval-in-minutes
Optional
By default, the topology
collection interval is one
minute.
Quit system view
quit
—
Start topology collection ntdp explore Optional
1.2.6 Enabling the Cluster Function
Table 1-7
Enable the cluster function
Operation Command Description
Enter system view system-view —
Enable the cluster
function globally
cluster enable
Optional
By default, the cluster function is enabled.