H3C Technologies H3C S3100 Series Switches - Manual (Page 550)

Operation Manual – FTP and TFTP
H3C S3100-52P Ethernet Switch Chapter 1 FTP and TFTP Configuration
1-18
# Upload the switch configuration file named config.cfg to the TFTP server.
tftp 1.1.1.2 put config.cfg config.cfg
# Use the boot boot-loader command to specify the downloaded file (switch.bin) to be
the startup file used when the switch starts the next time, and restart the switch. Thus
the switch application is upgraded.
boot boot-loader switch.bin
reboot
Note:
For information about the boot boot-loader command and how to specify the startup
file for a switch, refer to the “System Maintenance and Debugging” module of this
manual.