H3C Technologies H3C S3100 Series Switches - Manual (Page 396)

Operation Manual – QoS
H3C S3100-52P Ethernet Switch Chapter 1 QoS Configuration
1-3
service level can be segmented. The QoS rank of the AF class is lower than that of
the EF class;
z
Class selector (CS) class: This class comes from the IP TOS field and includes
eight classes;
z
Best Effort (BE) class: This class is a special class without any assurance in the
CS class. The AF class can be degraded to the BE class if it exceeds the limit.
Current IP network traffic belongs to this class by default.
Table 1-2
Description on DSCP values
DSCP value (decimal) DSCP value (binary) Description
46 101110 ef
10 001010 af11
12 001100 af12
14 001110 af13
18 010010 af21
20 010100 af22
22 010110 af23
26 011010 af31
28 011100 af32
30 011110 af33
34 100010 af41
36 100100 af42
38 100110 af43
8 001000 cs1
16 010000 cs2
24 011000 cs3
32 100000 cs4
40 101000 cs5
48 110000 cs6
56 111000 cs7
0 000000 default (be)
2) 802.1p
priority
802.1p priority lies in Layer 2 packet headers and is applicable to occasions where the
Layer 3 packet header does not need analysis but QoS must be assured at Layer 2.