3 web server shutdown/startup, 3 web server shutdown/startup -2 – H3C Technologies H3C S3100 Series Switches User Manual
Page 77

Operation Manual – Login
H3C S3100-52P Ethernet Switch
Chapter 5 Logging in through Web-based Network
Management System
5-2
[H3C-luser-admin] password simple admin
3) Establish an HTTP connection between your PC and the switch, as shown in the
following figure.
PC
HTTP Connection
Sw itch
PC
HTTP Connection
PC
HTTP Connection
Sw itch
PC
HTTP connection
PC
HTTP Connection
Sw itch
PC
HTTP Connection
PC
HTTP Connection
Sw itch
PC
HTTP connection
Figure 5-1
Establish an HTTP connection between your PC and the switch
4) Log into the switch through IE. Launch IE on the Web-based network
management terminal (your PC) and enter the IP address of the management
VLAN interface of the switch (here it is
(Make sure the route between the Web-based network management terminal and
the switch is available.)
5) When the login interface (as shown in Figure 5-2) appears, enter the user name
and the password configured in step 2 and click
of the Web-based network management system.
Figure 5-2
The login page of the Web-based network management system
5.3 Web Server Shutdown/Startup
You can shut down or start up the Web server.