H3C Technologies H3C S3100 Series Switches - Manual (Page 524)

Operation Manual – File System Management
H3C S3100-52P Ethernet Switch
Chapter 1 File System Management
Configuration
1-6
Caution:
z
For deleted files whose names are the same, only the latest deleted file is kept in the
recycle bin and can be restored.
z
The files which are deleted by the delete command without the /unreserved
keyword are actually moved to the recycle bin and thus still take storage space. You
can clear the recycle bin by using the reset recycle-bin command.
z
Use the update fabric command after all traffic flows are stopped.
z
The dir /all command displays the files in the recycle bin in square brackets.
z
If the configuration files are deleted, the switch adopts the default configuration
parameters when it starts up next time.
1.2.5 Flash Memory Operations
Perform the following Flash memory operations.
Table 1-6
Operations on the Flash memory
To do… Use the command… Remarks
Format the Flash memory
format
device Required
Restore space on the Flash memory fixdisk device Required
Caution:
The format operation leads to the loss of all files, including the configuration files, on the
Flash memory and is irretrievable.
1.2.6 Prompt Mode Configuration
You can set the prompt mode of the current file system to alert or quiet. In alert mode,
the file system will give a prompt for confirmation if you execute a command which may
cause data loss, for example, deleting or overwriting a file. In quiet mode, such prompt
will not be displayed.