H3C Technologies H3C S3100 Series Switches - Manual (Page 583)

Operation Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
Chapter 1 BootROM and Host Software
Loading
1-11
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
Step 4: Enter 2 in the above menu to download the BootROM software using FTP. Then
set the following FTP-related parameters as required:
Load File name :S3100-52P.btm
Switch IP address :10.1.1.2
Server IP address :10.1.1.1
FTP User Name :3152
FTP User Password :abc
Step 5: Press . The system displays the following information:
Are you sure to update your bootrom?Yes or No(Y/N)
Step 6: Enter Y to start file downloading or N to return to the Bootrom update menu. If
you enter Y, the system begins to download and update the program. Upon completion,
the system displays the following information:
Loading........................................done
Bootrom updating..........done!
z
Loading host software
Follow these steps to load the host software:
Step 1: Select <1> in Boot Menu and press . The system displays the following
information:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
Enter 2 in the above menu to download the host software using FTP.
The subsequent steps are the same as those for loading the BootROM program,
except for that the system gives the prompt for host software loading instead of
BootROM loading.