H3C Technologies H3C S3100 Series Switches - Manual (Page 33)

Operation Manual – Login
H3C S3100-52P Ethernet Switch Chapter 1 Logging into an Ethernet Switch
1-2
2) A relative user interface index can be obtained by appending a number to the
identifier of a user interface type. It is generated by user interface type. The
relative user interface indexes are as follows:
z
AUX user interface: AUX 0
z
VTY user interfaces: VTY 0, VTY 1, VTY 2, and so on.
1.2.3 Common User Interface Configuration
Table 1-2
Common user interface configuration
Operation Command Description
Lock the current user
interface
lock
Optional
Execute this command in
user view.
A user interface is not locked
by default.
Specify to send
messages to all user
interfaces/a specified
user interface
send
{ all | number |
type
number }
Optional
Execute this command in
user view.
Disconnect a specified
user interface
free user-interface
[ type ] number
Optional
Execute this command in
user view.
Enter system view
system-view
—
Enter user interface
view
user-interface
[ type ]
first-number
[ last-number ]
—
Set the command that is
automatically executed
when a user logs into
the user interface
auto-execute
command text
Optional
By default, no command is
automatically executed when
a user logs into a user
interface.
Display the information
about the current user
interface/all user
interfaces
display users
[ all ]
Display the physical
attributes and
configuration of the
current/a specified user
interface
display user-interface
[ type number | number ]
Display the information
about the current web
users
display web users
Optional
You can execute the display
command in any view.