H3C Technologies H3C S3100 Series Switches - Manual (Page 47)

Operation Manual – Login
H3C S3100-52P Ethernet Switch Chapter 2 Logging in through the Console Port
2-13
2.6 Console Port Login Configuration with Authentication
Mode Being Scheme
2.6.1 Configuration Procedure
Table 2-8
Console port login configuration with the authentication mode being scheme
Operation Command Description
Enter system view
system-view
—
Enter the
default ISP
domain view
domain
domain-name
Specify the
AAA scheme
to be applied
to the
domain
scheme
{ local |
none
|
radius-scheme
radius-scheme-name
[
local
] |
hwtacacs-scheme
hwtacacs-scheme-n
ame
[ local ] }
Configur
e the
authentic
ation
mode
Quit to
system view
quit
Optional
By default, the local AAA
scheme is applied.
If you specify to apply the local
AAA scheme, you need to
perform the configuration
concerning local user as well.
If you specify to apply an
existing scheme by providing
the
radius
-scheme-name
argument, you need to perform
the following configuration as
well:
z
Perform AAA&RADIUS
configuration on the switch.
(Refer to the
AAA&RADIUS&HWTACAC
S&EAD module for more.)
z
Configure the user name
and password accordingly
on the AAA server. (Refer to
the user manual of AAA
server.)
Create a local user
(Enter local user view.)
local-user
user-name
Required
No local user exists by default.
Set the authentication
password for the local
user
password
{ simple |
cipher
} password
Required
Specify the service type
for AUX users
service-type
terminal
[ level
level
]
Required
Quit to system view
quit —
Enter AUX user interface
view
user-interface aux
0 —