H3C Technologies H3C S3100 Series Switches - Manual (Page 520)

Operation Manual – File System Management
H3C S3100-52P Ethernet Switch
Chapter 1 File System Management
Configuration
1-2
will not possess the main attribute. If you download a file with the same name as the
original file with the main attribute to the flash memory, the file will possess the main
attribute.
After the BootROM of a switch is upgraded, the original default APP startup file has the
main attribute.
1.1.2 Configuring File Attributes
You can configure and view the main attribute or backup attribute of the startup file
used for the next startup of a switch, and change the main or backup attribute of the file.
Perform the configuration listed in Table 1-2 in user view. The display commands can
be executed in any view.
Table 1-2
Configure file attributes
To do… Use the command… Remarks
Configure the app file with
the main attribute for the
next startup
boot
boot-loader file-url Optional
Set the app file with the
backup attribute for the
next startup
boot boot-loader
backup-attribute
file-url
Optional
Configure the Web file and
its attribute
boot web-package
webfile
{ backup | main } Optional
Switch the file attributes
between main and backup
boot attribute-switch
{ all | app | configuration
| web }
Optional
Specify to enable user to
use the customized
password to enter the
BOOT menu
startup bootrom-access
enable
Optional
By default, the user is
enabled to use the
customized password to
enter the BOOT menu.
Display the information
about the app file used as
the startup file
display boot-loader
[ unit unit-id ]
Optional
This command can be
executed in any view.