H3C Technologies H3C S3100 Series Switches - Manual (Page 510)

Operation Manual – SSH Terminal Service
H3C S3100-52P Ethernet Switch Chapter 1 SSH Terminal Service
1-24
z
Setting connection idle timeout
I. Configuring service type for an SSH user
Table 1-12
Configure service type for an SSH user
Operation Command Description
Enter system view
system-view
—
Configure service type for
an SSH user
ssh user
username
service-type
{ stelnet |
sftp
| all }
Optional
By default, the service
type available for a user is
stelnet
.
II. Enabling SFTP Server
Table 1-13
Enable SFTP Server
Operation Command Description
Enter system view
system-view
—
Enable SFTP Server
sftp server enable
Required
By default, SFTP Server
is disabled.
III. Setting connection idle timeout time
You can set the idle timeout time for SFTP connections, so that the system can
automatically release a user connection when the user connection is idle for a time
longer than the time threshold you set.
Table 1-14
Set connection idle timeout time
Operation Command Description
Enter system view
system-view
—
Set idle timeout time for
SFTP connections
sftp timeout
time-out-value
Required
By default, the connection
idle timeout time is 10
minutes.
1.2.3 SFTP Client Configuration on the Switch
The following table describes SFTP Client configuration tasks on the switch: