H3C Technologies H3C S3100 Series Switches - Manual (Page 528)

Operation Manual – File System Management
H3C S3100-52P Ethernet Switch Chapter 2 FTP/TFTP Lighting Configuration
2-2
Figure 2-1
Clockwise rotating of the seven-segment digital LED
Table 2-1
Configuration for file upload from an FTP client to the switch acting as FTP
server
Device To do… Use the command… Remarks
Enable FTP server
ftp sever enable
Required
By default, FTP
server is disabled.
Add a local user and
enter local user view
local-user
user-name
Required
Set a password for
the local user
password
{ simple |
cipher
} password
Required
FTP
server
Set the password
display mode for local
users
local-user
password-display-
mode
{ auto |
cipher-force
}
Optional
By default, the mode
is auto (that is, the
switch displays user
passwords in the
modes configured
when the passwords
are set).
Log into the remote
FTP server
—
Required
For detailed
configuration, refer to
the configuration
instruction relevant to
FTP client.
FTP client
Upload file from the
FTP client to the FTP
server
—
Required
For detailed
configuration, refer to
the configuration
instruction relevant to
FTP client.
II. Enabling FTP client on the switch
After FTP client is enabled on an S3100-52P switch, the seven-segment digital LED on
the front panel of the switch will rotate clockwise when the FTP client (the S3100-52P
switch) is downloading file from an FTP server, and will stop rotating when the file
downloading is finished, as show in Figure 2-1.