H3C Technologies H3C S3100 Series Switches - Manual (Page 313)

Operation Manual – AAA – RADIUS – HWTACACS
H3C S3100-52P Ethernet Switch
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-14
Operation Command Description
Set the maximum number
of access users that can
be contained in the ISP
domain
access-limit
{ disable |
enable
max-user-number
}
Optional
By default, there is no limit
on the number of access
users that can be
contained in an ISP
domain.
Set the user idle-cut
function
idle-cut
{ disable |
enable
minute flow }
Optional
By default, the user
idle-cut function is
disabled.
Set the
accounting-optional
switch
accounting
optional
Optional
By default, the
accounting-optional
switch is closed.
Set the messenger
function
messenger time
{ enable limit interval |
disable
}
Optional
By default, the messenger
function is disabled.
Set the self-service server
location function
self-service-url
{ disable
| enable url-string }
Optional
By default, the
self-service server
location function is
disabled.
Caution:
z
On an S3100-52P Ethernet Switch, each access user belongs to an ISP domain.
You can configure up to 16 ISP domains on the switch. When a user logs in, if no
ISP domain name is carried in the user name, the switch assumes that the user
belongs to the default ISP domain.
z
If the system does not find any available accounting server or fails to communicate
with any accounting server when it performs accounting for a user, it will not
disconnect the user as long as the accounting optional command has been
executed, though it cannot perform accounting for the user in this case.
z
The self-service server location function needs the cooperation of a
self-service-supported RADIUS server (such as CAMS, that is, comprehensive
access management server). Through self-service, users can manage and control
their account or card numbers by themselves. A server installed with the self-service
software is called a self-service server.