H3C Technologies H3C S3100 Series Switches - Manual (Page 81)

Operation Manual – Login
H3C S3100-52P Ethernet Switch
Chapter 7 Configuring Source IP Address for
Telnet Service Packets
7-2
Note:
To perform the configurations listed in Table 7-1 and Table 7-2, make sure that:
z
The IP address specified is that of the local device.
z
The interface specified exists.
7.2 Displaying Source IP Address Configuration
Execute the display command in any view to display the operation state after the
above configurations. You can verify the configuration effect through the displayed
information.
Table 7-3
Display the source IP address configuration
Operation Command
Display the source IP address configured for
the Telnet client
display telnet source-ip
Display the source IP address configured for
the Telnet server
display telnet-server source-ip