H3C Technologies H3C S3100 Series Switches - Manual (Page 383)

Operation Manual – ACL
H3C S3100-52P Ethernet Switch Chapter 1 ACL Configuration
1-7
Arguments/Keywords Type Function Description
source
{ sour-addr
sour-wildcard
| any }
Source
address
Specifies the
source
address
information for
the ACL rule
The
sour-addr
sour-wildcard
arguments specify the
source address of the
packets, expressed in
dotted decimal notation.
You can specify the IP
address of a host as the
source address by
providing 0 for the
sour-wildcard
argument.
any
represents any
source address.
destination
{ dest-addr
dest-wildcard
| any }
Destination
address
Specifies the
destination
address
information for
the ACL rule
The
dest-addr
dest-wildcard
arguments specify the
destination address of
the packets, expressed
in dotted decimal
notation. You can
specify the IP address of
a host as the destination
address by providing 0
for the dest-wildcard
argument.
any
represents any
destination address.
precedence
precedence
Packet
priority
IP precedence
The
precedence
argument ranges from 0
to 7.
tos
tos
Packet
priority
ToS
The
tos
argument
ranges from 0 to 15.
dscp
dscp
Packet
priority
DSCP
The dscp argument
ranges from 0 to 63.
fragment
Fragment
information
Specifies that
the rule is
effective for
the packets
that are not the
first fragments.
—
time-range
time-name Time range
information
Specifies the
time range in
which the rule
is active.
—
If you specify the dscp keyword, you can directly input a value ranging from 0 to 63 or
input one of the keywords listed in Table 1-5 as the DSCP.