H3C Technologies H3C S3100 Series Switches - Manual (Page 435)

Operation Manual – Cluster
H3C S3100-52P Ethernet Switch Chapter 1 Cluster
1-12
II. Configuration procedure
Table 1-11
Configure NM interface for the cluster
Operation Command Description
Enter system view
system-view
—
Enter cluster view
cluster
Required
Configure the network
management (NM)
interface for the cluster
nm
-interface
Vlan
-interface vlan-id
Optional
By default, the management
VLAN interface is used as the
NM interface.
1.3 Cluster Configuration on Member Device
1.3.1 Member Device Cluster Configuration Tasks
Table 1-12
Member device Cluster configuration tasks
Operation Description Related section
Enable NDP globally and on
specific ports
Required
Section 1.3.2 Enabling NDP
Globally and on Specific Ports
Enable NTDP globally and on
a specific port
Required
Section 1.3.3 Enabling NTDP
Globally and on a Specific
Port
Enable the cluster function Required
Section 1.3.4 Enabling the
Cluster Function
Access shared FTP/TFTP
server from a member device
Optional
Section 1.3.5 Accessing
Shared FTP/TFTP Server