H3C Technologies H3C S3100 Series Switches - Manual (Page 500)

Operation Manual – SSH Terminal Service
H3C S3100-52P Ethernet Switch Chapter 1 SSH Terminal Service
1-14
Figure 1-8
SSH client interface 1
In the [Host Name (or IP address)] text box, enter the IP address of the server, for
example, 10.110.28.10. Note that the IP address can be the IP address of any interface
on the server that has SSH in the state of up and a route to the client.
III. Selecting the protocol for remote connection
As shown in Figure 1-8, select the [SSH] option from the [Protocol] section.
IV. Selecting the SSH version
From the category on the left of the window, click [Connection/SSH]. The window as
shown in Figure 1-9 appears.