H3C Technologies H3C S3100 Series Switches - Manual (Page 78)

Operation Manual – Login
H3C S3100-52P Ethernet Switch
Chapter 5 Logging in through Web-based Network
Management System
5-3
Table 5-2
Shut down/start up Web server
Operation Command Description
Shut down the
Web server
ip http shutdown
Required
Execute this command in system view.
Start the Web
server
undo ip http
shutdown
Required
Execute this command in system view.
The Web server is started by default.
Note:
To improve security and avoid malicious attack to the unused SOCKETs, TCP 80 port
for HTTP service will be enabled or disabled after corresponding configurations.
If you use the undo ip http shutdown command to enable the Web Server, TCP 80
will be enabled; if you use the ip http shutdown command to disabled the Web Server,
TCP 80 will be disabled.
Caution:
After the Web files are upgraded, you need to specify a new Web file from the boot
menu after the reboot. Otherwise, the Web Server function cannot be used normally.