V. open an ssh connection with rsa, Specifying the rsa private key file – H3C Technologies H3C S3100 Series Switches User Manual

Page 501

Text mode
Original mode

Operation Manual – SSH Terminal Service

H3C S3100-52P Ethernet Switch

Chapter 1 SSH Terminal Service

1-15

Figure 1-9

SSH client interface 2

In the [Protocol options] field, select [2] from the [Preferred SSH protocol version]
section.

V. Open an SSH Connection with RSA

If the client needs to use RSA authentication, you must specify the RSA private key file.
If the client needs to use password authentication, this is not required.
From the category on the left of the window, click [Connection/SSH/Auth]. The following
window appears.