H3C Technologies H3C S3100 Series Switches - Manual (Page 449)

Operation Manual – SNMP and RMON
H3C S3100-52P Ethernet Switch Chapter 1 SNMP Configuration
1-4
Operation Command Description
Set system information
snmp-agent sys-info
{ contact sys-contact |
location
sys-location |
version
{ { v1 | v2c |
v3
}* | all } }
Required
By default, the contact
information for system
maintenance is "
Hangzhou H3C
Technologies.
Co.,Ltd.", the system
location is "Hangzhou
China", and the
SNMP version is
SNMPv3.
Direct
configu
ration
Set a
commun
ity name
snmp-agent
community
{ read |
write
} community-name
[ acl acl-number |
mib-view
view-name ]*
Set an
SNMP
group
snmp-agent group
{ v1
| v2c } group-name
[ read-view read-view ]
[ write-view write-view ]
[
notify-view
notify-view
] [ acl
acl-number
]
Set a
communi
ty name
and
access
permissi
on
Indirect
configu
ration
Add a
user to
an
SNMP
group
snmp-agent usm-user
{ v1 | v2c } user-name
group-name
[ acl
acl-number
]
Required
z
You can set an
SNMPv1/SNMPv2
C community
name through
direct
configuration.
z
Indirect
configuration is
compatible with
SNMPv3. The
added user is
equal to the
community name
for SNMPv1 and
SNMPv2C.
z
You can choose
either of them as
needed.
Set the maximum SNMP
packet size for SNMP agent
snmp-agent packet
max
-size byte-count
Optional
By default, the
maximum SNMP
packet size is 1,500
bytes.
Set the device engine ID
snmp-agent
local
-engineid engineid
Optional
By default, the device
engine ID is formed by
appending device
information to the
enterprise number.
Create/Update the view
information
snmp-agent mib
-view
{ included | excluded }
view
-name oid-tree
Optional
By default, the view
name is “ViewDefault”
and OID is 1.