H3C Technologies H3C S3100 Series Switches - Manual (Page 505)

Operation Manual – SSH Terminal Service
H3C S3100-52P Ethernet Switch Chapter 1 SSH Terminal Service
1-19
1.1.5 Displaying SSH Configuration
After the above configuration, you can execute the display command in any view to
display the configuration information and running status of SSH, so as to verify your
configuration.
Table 1-11
Display SSH configuration
Operation Command Description
Display host and server
public keys
display rsa
local-key-pair public
Display client RSA public
key(s)
display rsa
peer-public-key
[ brief |
name keyname
]
Display SSH status and
session information
display ssh server
{
status
| session }
Display SSH user
information
display ssh
user-information
[ username ]
Display the current source
IP address or the IP
address of the source
interface specified for the
SSH server.
display ssh-server
source-ip
Display the current source
IP address specified for
the SSH2.0 Client.
display ssh2 source-ip
You can execute the
display
command in any
view.
1.1.6 SSH Server Configuration Example
I. Network requirements
As shown in Figure 1-12, The PC (SSH Client) running an SSH2.0-supported client
software, establish a local connection with the switch (SSH Server) to ensure the
security of data exchange.