H3C Technologies H3C S3100 Series Switches - Manual (Page 599)

Operation Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch Chapter 4 Device Management
4-2
Note:
When rebooting, the system checks whether there is any configuration change. If there
is, it prompts you to indicate whether or not to proceed. This prevents you from losing
your original configuration due to oblivion after system reboot.
4.2.3 Scheduling a Reboot on the Switch
After you schedule a reboot on the switch, the switch will reboot at the specified time.
Table 4-3
Schedule a reboot on the switch
Operation Command Description
Schedule a reboot on the switch,
and set the reboot date and time
schedule reboot at hh:mm
[ mm/dd/yyyy | yyyy/mm/dd ] Optional
Schedule a reboot on the switch,
and set the reboot waiting delay
schedule reboot delay
{ hh:mm | mm }
Optional
Enter system view
system-view
—
Schedule a reboot on the switch,
and set the reboot period
schedule reboot regularity
at
hh:mm period
Optional
Note:
There is at most one minute defer for scheduled reboot, that is, the switch will reboot
within one minute after reaching the specified reboot date and time.
4.2.4 Specifying the APP to be Adopted at Reboot
APP is the host software of the switch. If multiple APPs exist in the Flash memory, you
can use the command here to specify the one that will be adopted when the switch
reboots.
Perform the following configuration in user view:
Table 4-4
Specify the APP to be adopted at reboot
Operation Command Description
Specify the APP to
be adopted at
reboot
boot boot-loader
[ backup-attribute ] { file-url |
device-name
}
Optional