H3C Technologies H3C S3100 Series Switches - Manual (Page 38)

Operation Manual – Login
H3C S3100-52P Ethernet Switch Chapter 2 Logging in through the Console Port
2-4
Configuration Remarks
AUX user
interface
configuration
Configure the
command level
available to the users
logging into the AUX
user interface
Optional
By default, commands of level 3 are
available to the users logging into the AUX
user interface.
Make terminal
services available
Optional
By default, terminal services are available in
all user interfaces
Set the maximum
number of lines the
screen can contain
Optional
By default, the screen can contain up to 24
lines.
Set history command
buffer size
Optional
By default, the history command buffer can
contain up to 10 commands.
Terminal
configuration
Set the timeout time
of a user interface
Optional
The default timeout time is 10 minutes.
Caution:
Changing of Console port configuration terminates the connection to the Console port.
To establish the connection again, you need to modify the configuration of the
termination emulation utility running on your PC accordingly. Refer to section 2.2
“Logging in through the Console Port” for more.
2.3.2 Console Port Login Configurations for Different Authentication Modes
Table 2-3 lists Console port login configurations for different authentication modes.
Table 2-3
Console port login configurations for different authentication modes
Authentication
mode
Console port login
configuration
Remarks
None
Perform
common
configuration
Perform common
configuration for
Console port
login
Optional
Refer to section 2.3.1
“Common Configuration” for
more.