Carrier Access Network Device Axxius 800 User Manual
Page 94
4-22
Axxius 800 - Release 2.2
Configuration
Setup of DS0 Management Channel
2. Set the following on this screen:
Rename RemoteUnit (default name) to Axxius1.
Set WAN Networks Updates for IP to
Set WAN IP: Numbered to
3.
[T
AB
]
to Setup:
not displayed).
Note: if the IP Protocol is set to
available.
4. Set Setup Static: to
displayed)
5. Select
[C
TRL
A]
to add a Static IP Address.