Carrier Access Network Device Axxius 800 - Manual (Page 149)

Axxius 800 - Release 2.2 5-49
CLI Commands
delete
delete (router-lan) secondary ip address
Use the delete (router-lan) secondary ip address command to delete a secondary IP address
and subnet to the specified LAN interface.
Syntax: delete {rtr_lan-addr} secondary ip address
{ip-addr [mask]|ip-addr/bits}
Example: delete 4:1 secondary ip address 192.168.1.1
The example will delete a secondary IP address of 192.168.1.1.
{rtr_lan-addr}
The Router address is in the form {slot:port} or {slot "profile-name"}.
{ip-addr [mask]|ip-addr/bits}
slot The slot number (1-8) that contains the Router card
port Port number of the Router.
"profile-name" The profile name for the Router interface. Name must be enclosed in
quotes, with a maximum length of 11 characters
ip-addr The IP address of a current secondary IP address, in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255.
mask The mask of the secondary IP address, in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255
bits The subnet mask, specified as the number of ones bits in the mask
value. Range is between 1-32.