Carrier Access Network Device Axxius 800 - Manual (Page 53)

Axxius 800 - Release 2.2 2-3
Physical Installation
Installation Environment
Installation Environment
The environment in which you are installing the Axxius 800 must meet the following
conditions:
DANGER! R ESTRICTED A CCESS L OCATION FOR A CCESS 800: A CCESS CAN
ONLY BE GAINED BY SERVICE PERSONNEL OR USERS WHO HAVE BEEN
INSTRUCTED ABOUT THE POTENTIAL SAFETY HAZARDS THAT EXIST . A CCESS
CAN ONLY BE GAINED TO THE EQUIPMENT LOCATION BY THE USE OF A TOOL OR
LOCK AND KEY . T AKE PRECAUTIONS WHEN INSTALLING / SERVICING THE
EQUIPMENT . H AZARDOUS E NERGY LEVELS EXIST ON THE POWER SUPPLY .
B ARE TELECOMMUNICATION NETWORK WIRING IS EXPOSED ON THE REAR
PANEL . D ISCONNECT FROM NETWORK BEFORE INSTALLING WIRE - WRAP
CONNECTIONS .
NOTE: Installation of unit in Operator Access Locations is possible for 48V
powered units under certain circumstances. Please contact Customer
Service for information on the Axxius DC Input Shroud Kit P/N 790-0027.
l Operating temperature range: -40
°
to 149
°
F (-40
°
to 65
°
C)
*please see items following that do not operate within this range
l V.34 modem operating temperature range: 32
°
to 149
°
F (0
°
to 65
°
C)
l FXO, ISDN BRI, and OCU-DP service cards operating temperature range:
32
°
to 104
°
F (0
°
to 40
°
C)
l Storage temperature range: -40
°
to 158
°
F (-40
°
to 70
°
C)
l Cooling method is by free air convection
l Maximum operating altitude: 10,000 ft. (3,048 m)
l Minimum operating altitude: 197 ft. (60 m) below sea level
l Maximum non-operating altitude: 40,000 ft. (12,192 m)
l Relative humidity (non-condensing) range: 0 to 95%