Carrier Access Network Device Axxius 800 - Manual (Page 162)

5-62 Axxius 800 - Release 2.2
CLI Commands
log
log
log
Displays the event log. Where the optional [slot:port:channel], [category], and [severity] are
variables used to narrow down the log displayed. The log command without any options
displays a full log.
Syntax: log [slot|slot:port] [category] [severity]
Example: log a:1
Time Date Severity Description
00:00:08 01/01/2002 Major A:1:28-DS1 Loss Of Frame
00:00:08 01/01/2002 Major A:1:27-DS1 Loss Of Frame
00:00:08 01/01/2002 Major A:1:26-DS1 Loss Of Frame
Total=3
[slot|slot:port|slot:port:channel]
[category]
[severity]
slot A for the controller card, or 1-8 for service cards
port Port number (not a range)
channel Channel number or range
slot A for the controller card, or 1-8 for service cards
port Port number (not a range)
channel Channel number or range
slot A for the controller card, or 1-8 for service cards
port Port number (not a range)
channel Channel number or range
slot A for the controller card, or 1-8 for service cards
port Port number (not a range)
alert Alert events (threshold crossing)
critical Critical events
info Information events
major Major events (service effecting)
minor Minor events (non-service affecting)