Delete (router-wan) firewall, Delete (router-wan) firewall -53 – Carrier Access Network Device Axxius 800 User Manual
Page 153

Axxius 800 - Release 2.2
5-53
CLI Commands
delete
delete (router-lan) static mac address
Use the delete (router-lan) static mac address command to delete a static MAC address
entry to the specified LAN interface.
Syntax:
delete {rtr_lan-addr} static mac address {mac-addr}
Example:
delete 3:1 static mac address 0x00e09700e9cd
The example will delete a static MAC address, 00:e0:97:00:e9:cd, from the
LAN interface of the Router card in slot 5.
{rtr_lan-addr}
The Router address is in the form {slot:port} or {slot "profile-name"}.
{mac-addr}
The MAC address to add to the learned address table for the LAN, in the form a
6-octet HEX value, 0xxxxxxxxxxxx. Note that the MAC address is preceeded by a 0x.
delete (router-wan) firewall
Use the delete (router-wan) firewall command to delete a firewall rule from a WAN.
Syntax:
delete {rtr_card-addr} {"wan-name"} firewall
{all|rule-number}
Example:
delete 3 "LosAngeles" firewall all
The example will remove all firewalls rules on the Router in slot 3, for the
profile "LosAngeles".
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{all|rule-number}
slot
The slot number (1-8) that contains the Router card
port
Port number of the Router.
"profile-name" The profile name for the Router interface. Name must be enclosed in
quotes, with a maximum length of 11 characters
all
Delete all firewall rules on this WAN
rule-number
The specific firewall rule to delete