Carrier Access Network Device Axxius 800 - Manual (Page 351)

Axxius 800 - Release 2.2 5-251
CLI Commands
status
status (router) mac address table
Use the status (router) mac address table command to display the current table of learned
MAC Addresses for the specified interface on the Router card.
Syntax: status {rtr_card-addr} mac address table
["profile-name"]
Example: status 5 mac address table
> status 5 mac address table
ROUTER BLADE MAC ADDRESSES REPORT Slot-5
Axxius50 has learned 2 MAC Addresses from 1 Port.
Display: Learned From:
Port Name MAC Address
1. Local LAN Direct 00E09701E574
2. Local LAN Static 00E09700E9CD
Example: status 5 mac address table "Axxius50"
> status 5 mac address table "Axxius50"
ROUTER BLADE MAC ADDRESSES REPORT Slot-5
Axxius50 has learned 2 MAC Addresses
Display: Learned From:
MAC Address
1. Direct 00E09701E574
2. Static 00E09700E9CD
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
["profile-name"]
The profile name for the Router interface that is used to reach this destination. Name must
be enclosed in quotes, with a maximum length of 11 characters.