Carrier Access Network Device Axxius 800 - Manual (Page 352)

5-252 Axxius 800 - Release 2.2
CLI Commands
status
status (router) performance
Use the status (router) performance command to display the current runtime statistics
from the specified Router card.
Syntax: status {rtr_card-addr} performance
Example: status 5 performance
ROUTER BLADE PERFORMANCE REPORT Slot-5
Run-time Statistics for Axxius50.
LAN Packet Totals: Received 0 Transmitted 0 Errors 0
WAN Packet Totals: Received 0 Transmitted 0 Errors 0
Remote’s Forwarded Throughput Comp. Ratio Remote
Name to WAN to/from WAN to/from WAN conns.
LosAngeles 0 pps 0 /0 bps / 0
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
status (router) stp
Use the status (router) stp command to display the current Spanning Tree state from the
specified Router card.
Syntax: status {rtr_card-addr} stp
Example: status 5 stp
ROUTER BLADE SPANNING TREE PROTOCOL REPORT Slot-5
STP Stats
No Enabled STP Ports Detected.
STP View
Bridge Priority: 32768 Address:00E09701E574
Root Priority: 32768 Address:00E09701E574
Root Port: 0 Path Cost 0
{rtr_card-addr}
The slot number (1-8) that contains the Router card.