Carrier Access Network Device Axxius 800 - Manual (Page 338)

5-238 Axxius 800 - Release 2.2
CLI Commands
status
status equipment
Use the status equipment command to display current equipment information of the Axxius
800.
Syntax: status equipment [slot]
Example: status equipment
Axxius> status equipment
CardType Status SW Vers CLEI
SLOT P1 +24 V Healthy SIPUMR0DAA
SLOT P2 Card not installed
SLOT A1 T3x2 Active 2.1.0 SIIX60FDAA
SLOT A2 T3x2 Hot Standby 2.1.0 SIIX60FDAA
SLOT B1 Card not installed
SLOT B2 Card not installed
SLOT 1 TSRx4 Present 1.03 SIC380XCAA
SLOT 2 T1x4 Not Present
SLOT 3 V35x2 Present 2.01 SIC3HK0CAA
SLOT 4 V35x2 Present 2.01 SIC3HK0CAA
SLOT 5 BRIx8 Present 1.11 SIIXUX0DAA
SLOT 6 OCUDPx1 Present 1.01 SIIXA4DDAA
SLOT 7 FXOx8 Present 1.12 SIIXPV0DAA
SLOT 8 FXSPSMx1 Present 0.01
Example: status equipment a2
Axxius> status equipment a2
SLOT A2:
Product: Axxius 800
Card Type: Controller with T3x2 Services
Status: Active
Card Revision: A.00
BootCode Revision: 1.6
SW Revision: 2.1.0 (build: 6)
CLEI: SIIX60FDAA