Carrier Access Network Device Axxius 800 - Manual (Page 155)

Axxius 800 - Release 2.2 5-55
CLI Commands
delete
delete (router-wan) static
Use the delete (router-wan) static commands to delete a static element from the WAN
interface.
delete (router-wan) static ip address
Use the delete (router-wan) static ip address command to delete a static IP address on the
specified WAN interface.
Syntax: delete {rtr_card-addr} {"wan-name"} static ip address
{ip-addr}
Example: delete 3 "LosAngeles" static ip address
195.168.201.140
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{ip-addr}
The IP address to delete from the WAN, in the form of xxx.xxx.xxx.xxx, where xxx is
between 0-255.