Carrier Access Network Device Axxius 800 - Manual (Page 520)

C-10 Axxius 800 - Release 2.2
Loopback Tests
DS1 Loopbacks
Receiving DS-1 CSU Loop
Causes a line Loopback. Loopup code sent by remote unit or network. Occurs at local
DS1 CSU. Have DS1 vendor check for framing/errors.
Enable Detection of CSU Loopcode
Enable detection of CSU loop code (10000 for loopup; 100 for loopdown).
> set a:1 loopdetect on
OK
T1
Axxius
Local
DTE
Local
DCE
V.35
DS1
Network
Loopup Code Sent by Remote Unit
Signal Not Reframed
CSU Loopup
Code