Carrier Access Network Device Axxius 800 - Manual (Page 345)

Axxius 800 - Release 2.2 5-245
CLI Commands
status
status (router)
status (router) alarms
Use the status (router) alarms command to display the current alarm log from the
specified TSR card.
Syntax: status {tsr_card-addr} alarms
Example: status 5 alarms
ROUTER BLADE ALARM LOG REPORT Slot-5
Time Message Count
Jan 4 22:26:47.0 Ethernet Link 5:1 Down.
{tsr_card-addr}
The slot number (1-8) that contains the TSR card.
status (router) dns
Use the status (router) dns command to display the current state of DNS resolver and the
entries in the DNS cache.
Syntax: status {tsr_card-addr} dns
Example: status 4 dns
> status 4 dns
ROUTER BLADE DNS RESOLVER REPORT Slot-4
DNS RESOLVER IS ENABLED
My DNS Ip Address 10. 0. 0. 1
My DNS Hostname Axxius25.test
Primary DNS Server 10. 10. 10. 0
Secondary DNS Server 0. 0. 0. 0
{tsr_card-addr}
The slot number (1-8) that contains the TSR card.