Ferrite beads, Ferrite beads -3 – Carrier Access Network Device Axxius 800 User Manual
Page 59

Axxius 800 - Release 2.2
3-3
Electrical Installation and Cabling
Compliant Installation
Ferrite Beads
To be compliant with FCC Part 15 EMI limits with the Quad DS1 ADPCM service card
installed:
l
Route alarm cables separate from the rear panel tip/ring cabling (wire wrap
pins).
l
Install ferrite bead accompanying this card on the visible, audible and
environmental input alarm cable bundle
Ferrite beads shipped with Quad DS1 ADPCM card:
Ferrite Provided
Part Number
Intended For
1 large
P/N 010-0051
Alarm cable