Carrier Access Network Device Axxius 800 - Manual (Page 437)

Axxius 800 - Release 2.2 13-7
Quad DS1 ADPCM Card
Card Configuration
l show (adpcm)
Displays current settings for the ADPCM card (circuit ID, up.down,
framing, line coding, line build out, loop code detection, loop back, fdl type,
ADPCM, ADPCM Map)
l show connect adpcm
Displays the connections for the ADPCM port.
l show (ds1)
Displays current settings for DS1
l show lsprotect
Displays the low speed protection settings.
l status (adpcm)
Displays the status of the ADPCM card (receive, transmit, loopback)
l status (ds1)
Displays the status of the DS1 (receive, transmit, loopback)
l status lsprotect
Displays the current status of the low speed protection cards.