Carrier Access Network Device Axxius 800 - Manual (Page 313)

Axxius 800 - Release 2.2 5-213
CLI Commands
show
WAN Spanning Tree Protocol Settings for RemoteUnit:
Spanning Tree: Disabled
WAN Static IP Network Settings for RemoteUnit:
Total: 0
WAN Static IPX Network Settings for RemoteUnit:
Total: 0
WAN Static IP Address Settings for RemoteUnit:
Total: 0
WAN Static MAC Address Settings for RemoteUnit:
Total: 0
WAN Static NAT Address Settings for RemoteUnit:
Total: 0
WAN Firewall Settings for RemoteUnit:
Service(s) LAN Device(s) WAN Device(s) Lo
1. Telnet 100.2.3.4/32 <== * Log
Last ! Any * <== ==> *
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
An existing WAN interface to modify. The name must be enclosed in quotes.