Carrier Access Network Device Axxius 800 - Manual (Page 334)

5-234 Axxius 800 - Release 2.2
CLI Commands
status
status (ds1) performance history
Use the status (ds1) performance history command to display performance statistics for the
current 15 minute interval and all previous 15 minute intervals (up to a total of 96) of a DS1.
Syntax: status {ds1-addr} performance history
Example: status a:1 performance history
SLOT A:
Performance Statistics for DS1 1:
UAS SES ES SEFS LES CSS BES DM LCV PCV
curr. interval: 288 0 0 0 0 0 0 0 0 0
prev. intvl 1: 900 0 0 0 0 0 0 0 0 0
prev. intvl 2: 900 0 0 0 0 0 0 0 0 0
prev. intvl 3: 900 0 0 0 0 0 0 0 0 0
prev. intvl 4: 900 0 0 0 0 0 0 0 0 0
totals: 3888 0 0 0 0 0 0 0 0 0
elapsed time in current 15 min. interval: 4:48
valid 15 min. intervals in data: 4
{ds1-addr}
The Controller DS1 addresses are different on the DS3 and DS1 Controller, however the
DS1 address on the services cards does not change with Controller type (DS3 or DS1).
DS1 Address on a DS3 Controller in the form {slot:port:channel}
slot A for the DS3 Controller card.
port Port number, range or all.
channel Channel number, range or all.
DS1 Address on a DS1 Controller or service cards (with DS1 or DS3 controller) in
the form {slot:port}
slot A for the DS1 Controller card (DS1 mode), or 1-8 for service cards.
port Port number, range or all.