Carrier Access Network Device Axxius 800 - Manual (Page 335)

Axxius 800 - Release 2.2 5-235
CLI Commands
status
status (ds3)
Use the status (ds3) command to display the current status of the specified DS3.
Syntax: status {ds3-addr}
Example: status a:1
> status a:1
SLOT A:
Status for DS3 1 DS1 1:
Status for DS3 1:
Receive: Loss of Framing
Transmit: Traffic
Loopback: OFF
{ds3-addr}
In the form of {slot port}:
slot A, with a DS3 controller card installed.
port Port number or range. Range of ports is 1-2