Show (router) port, Show (router) port -199, Cli commands – Carrier Access Network Device Axxius 800 User Manual
Page 299

Axxius 800 - Release 2.2
5-199
CLI Commands
show
show (router) port
The show (router) port command displays the current TSR ports configuration. This command
applies to the Terminal Server Router card only.
Syntax:
show {tsr_card-addr} port
Example:
show 1 port
SLOT 1:
Port Profiles for Terminal Server Router:
Port 1
Name: none
Type: RS-232
Asynchronous Settings
Socket: 10.10.11.1:23 TCP
Baud Rate 9600
Data Bits 8
Stop Bits 1
No Parity
No Flowcontrol
Port 2
Name: none
Type: RS-232
Asynchronous Settings
Socket: 10.10.11.2:23 TCP
Baud Rate 9600
Data Bits 8
Stop Bits 1
No Parity
No Flowcontrol
Port 3
Name: none
Type: Ethernet
Port 4
Name: none
Type: Ethernet
{tsr_card-addr}
The slot number (1-8) that contains the TSR card.