Carrier Access Network Device Axxius 800 - Manual (Page 239)

Axxius 800 - Release 2.2 5-139
CLI Commands
set
set (router-lan) filter forward
Use the set (router-lan) filter forward command to specify the forwarding mode for Layer 2
filters on the LAN interface.
Syntax: set {rtr_lan-addr} filter forward
{matching|nontmatching}
Example: set 3:1 filter forward notmatching
{rtr_lan-addr}
The Router address is in the form {slot:port} or {slot "profile-name"}.
{matching|nontmatching}
slot The slot number (1-8) that contains the Router card.
port Port number of the Router.
"profile-name" The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.
matching Only those frames matching a rule will be forwarded.
notmatching Only those frames NOT matching a rule will be forwarded.