Show (router) lmi, Show (router) login, Show (router) lmi -197 – Carrier Access Network Device Axxius 800 User Manual
Page 297: Show (router) login -197
Axxius 800 - Release 2.2
5-197
CLI Commands
show
show (router) lmi
The show (router) lmi command displays the current Local Management Interface (LMI)
settings for the Router card.
Syntax:
show {rtr_card-addr} lmi
Example:
show 5 lmi
The example shows the LMI settings for the Router card in slot 5.
> show 5 lmi
SLOT 5:
LMI Settings for Router:
LMI: Disabled
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
show (router) login
The show (router) login command displays the Router login configuration.
Syntax:
show {rtr_card-addr} login
Example:
show 1 login
SLOT 1:
Login Settings for Router:
Authentication: Local
Login Prompt: Enabled
{rtr_card-addr}
The slot number (1-8) that contains the Router card.