Clear key, Clear log, Clear (ocudp) performance – Carrier Access Network Device Axxius 800 User Manual
Page 137: Clear key -37, Clear log -37, Clear (ocudp) performance -37

Axxius 800 - Release 2.2
5-37
CLI Commands
clear
clear key
Use the clear key command to remove a specific keyed feature. To acquire a feature key code,
contact Carrier Access Customer Service.
Syntax:
clear [rtr_card-addr] key {"key-code"}
Example:
clear key "q0B8yma2IsSL+1BarY0u"
[rtr_card-addr]
The slot number (1-8) that contains the Router card. This optional parameter is used for
router specific keyed features.
{"key-code"} -
The key code is entered to enable the specific feature.
clear log
Use the clear log command to clear the event log. This will clear the log without asking for
confirmation.
Syntax:
clear log
clear (ocudp) performance
Use the clear (ocudp) performance command to clear OCU-DP status counters.
Syntax:
clear {ocudp-addr} performance
Example:
clear 3:1 performance
Clears status counters on port 1 of the OCU-DP card in slot 3.
{ocudp-addr}
In the form {slot:port}.
slot
Slot number (1-8) that contains the OCU-DP card.
port
Port number, range or all.