Carrier Access Network Device Axxius 800 - Manual (Page 252)

5-152 Axxius 800 - Release 2.2
CLI Commands
set
set (router-wan) dlci
Use the set (router-wan) dlci command to set the DLCI (Data Link Connection Identifier) for
a specified WAN interface.
Syntax: set {rtr_card-addr} {"wan-name"} dlci {value}
Example: set 1 "LosAngeles" dlci 16
The example will set the WAN interface named "LosAngeles" on the Router
card in slot 1 to use DLCI value 16.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{value}
DLCI value to use, 16-1022