Carrier Access Network Device Axxius 800 - Manual (Page 283)

Axxius 800 - Release 2.2 5-183
CLI Commands
show
show (ds3)
The show (ds3) command displays the current settings for a DS3.
Syntax: show {ds3-addr}
Example: show a:1
SLOT A:
Settings for DS3 Port 1:
Circuit ID: CAC T3# A:1
Up/Down: UP
De-jitter Buffer: OFF
Framing: M23
Transmit Clock: NORMAL
Loop Code Detection: OFF
Loopback: OFF
Berthreshold: 0
Protection Switching: OFF
Protection Reversion: OFF
Equipment ID:
Location ID:
Frame ID:
Unit ID:
Facility ID:
Port Number:
Generator Number:
FE Equipment ID:
FE Location ID:
FE Frame ID:
FE Unit ID:
FE Facility ID:
FE Port Number:
FE Generator Number:
Performance Threshold Settings 15 min. 1 day
unavailable seconds: 0 0
sev. errored frame seconds: 0 0
cbit sev. errored seconds: 0 0
cbit errored seconds: 0 0
pbit sev. errored seconds: 0 0
pbit errored seconds: 0 0
line errored seconds: 0 0
line code violations: 0 0
cbit code violations: 0 0
pbit code violations: 0 0