Carrier Access Network Device Axxius 800 - Manual (Page 319)

Axxius 800 - Release 2.2 5-219
CLI Commands
show
show (router-wan) trunk
The show (router-wan) trunk command displays the current trunk assignment for the specified
WAN interface.
Syntax: show {rtr_card-addr} {"wan-name"} trunk
Example: show 5 "LosAngeles" trunk
> show 5 "LosAngeles" trunk
SLOT 5:
WAN Trunk Setting for LosAngeles:
WAN Port Number: 1
Connection Type: PPP
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
show screen
The show screen command displays the screen settings.
Example: show screen
Screen Height = 23