Features, Technical specifications, Controller software and hardware required – Carrier Access Network Device Axxius 800 User Manual
Page 484: Protection capacity, Switchover criteria, Features -4 technical specifications -4

17-4
Axxius 800 - Release 2.2
Low Speed Protection Card
Features
Features
l
Redundant 1:7 T1 interface protection
l
Maintains service during card swaps
l
Four T1 ports provide hot-standby backup for up to 28 T1 ports
l
Any of the eight service slots can be designated as a Backup card slot
l
Seven selectable protection priority levels
l
Selectable 24-hour lockout feature
l
Enables remote SNMP, or Telnet provisioning, monitoring and testing of services
and network conditions
Technical Specifications
Controller Software and Hardware Required
l
Controller software Release 1.2 or higher is required for the Low Speed
Protection card
l
Quad T1 Service cards (2 min.) requires Quad T1 Release 2.0 or higher
l
Quad DS1 ADPCM Service cards (2 min.) Requires Controller Release 2.0 or
higher
Protection Capacity
l
1:7 T1 ports
Switchover Criteria
l
Active card removal
l
Line code violation count
l
Loss of Signal/Loss of Frame
l
All zeros
l
Internally shorted pair
l
Active card power loss